Home collection cutting meat on mobile preparation kitchen
Cooking Tips keyboard_arrow_down

Not cooking evenly, burning on the outer ends and simmering towards to middle.keyboard_arrow_down

The front area and edges on the flat plate are used as a resting zone whilst the middle of the plate is the concentrated heat zone. The grill plate always retains more heat and is best when cooking produce that needs a high temperature to seal in the juices.

Are there any accessories available?keyboard_arrow_down

Yes. You can find full details of accessories available here.

Should I cook with the hood up or down?keyboard_arrow_down

The FURNACE and FORCE are designed to be used either way, with the power to cook with the hood up, and the benefits of convection heating if you cook with the hood down, perfect for Sunday roasts. Just remember to pre-heat your grill for 5 mins (ambient temperature conditions dependent) before starting.

Learn More keyboard_arrow_down

Where should I store my grill?keyboard_arrow_down

When not in use, be sure to keep your grill in a well-protected area. For the best protection, we recommend covering it with a fitted Everdure by Heston Premium Cover, to avoid weather damage.

How often should I clean my grill?keyboard_arrow_down

Once the grill has cooled, a simple wipe down is all that’s needed. We recommend cleaning your grill after every use, but don’t use harsh chemicals, or abrasive wire, as this may damage the protective coating on the grills and outer body. To help make cleaning easier, the firebox is designed with minimal angles and joins, which can trap grease. You can also oil grills before and after use to help prevent food sticking.

How do I clean my BBQ grill plates?keyboard_arrow_down

Soap and water with a scotch pad or steel wool will work. For stubborn grime, soak the plates in a bucket of warm, soapy water then scrub with a suitable brush. Repeat until clean. Just make sure you clean along the grill and not across it.

Can I use phosphoric based cleaning solution on my grills?keyboard_arrow_down

Do not use phosphoric based cleaners as the grills are cast iron with a vitreous enamel coating. Vitreous enamel, also called porcelain enamel, is a material made by fusing powdered glass to a substrate by firing, usually between 750 and 850C (1,380 and 1,560F). The powder melts, flows, and then hardens to a smooth, durable vitreous coating. If your porcelain grill grates are really dirty, you can try applying a baking soda solution to them. Make a paste by combining 1 cup (90 g) of baking soda with 1/2 cup (59 ml) of warm water. Apply the paste to the grill grates. Let it sit for 20 minutes and then clean it off with a soft bristle grill brush. Make sure you get all of the paste off before you cook anything on the grill, and clean the brush when you’re done. You could remove the grates and let the solution soak overnight, if necessary, in a sink or tub. Rinse the solution off, then replace the grates and clean them with a grill brush.

Will the cover keep my grill dry?keyboard_arrow_down

Our grill covers, are waterproof and are made of 425 GSM with a waterproof lining. Please be aware that you can get humidity and condensation forming between the cover and the grill depending on your climate and location.

How can I clean below the burners/ignition?keyboard_arrow_down

Warm soapy water is fine but you can also dissolve a dishwasher tablet in warm water and then use that to dissolve the grease and fat.

How do I cook with the hood down?keyboard_arrow_down

The FURNACE has three burners and the FORCE has two burners so the technique is slightly different but the convection science is still the same. The idea of convection heating is to cook, slow and low. When the hood is down, we recommend having only one burner on low or medium setting (depending on the weather). Place the meat over the section with the burners completely off; this will generate a great 680°F hot airflow around the meat without scorching the underside (the indirect method). Remember to NEVER leave the burners on high with the hood down for more than 5 minutes, the grill will overheat. For even better results, try the Everdure by Heston Blumenthal roasting rack .

How do I maintain the paint finish?keyboard_arrow_down

It is recommended to clean the hood and firebox with a microfibre cloth before first use and regularly thereafter. On rare occasions, the hood paint finish may change slightly due to heat. To restore the paint to its original finish, we recommend following the below instructions. Never attempt to clean the grill whilst in use. Always allow the grill to cool before cleaning. Once cool, apply a small amount of multi-surface polish to the top of the hood. Using a microfibre cloth, gently wipe down until all polish residue has been removed. The paint finish should quickly return to its original gloss finish

Do I need to use lava rock or diffusers?keyboard_arrow_down

No. The grills are designed with integrated flame tamers. This stops oils and juices from falling directly onto the burners (to help reduce flare-ups).

Can I use natural gas?keyboard_arrow_down

The grills can be converted for use with natural gas using the conversion kit

Is it ok to put the plates or grills in the dishwasher?keyboard_arrow_down

The plates and grills on the FURNACE and FORCE are coated in porcelain enamel (which aids heat retention and helps avoid food sticking on the surface). Dishwasher detergent can break down the porcelain enamel over time, so we don’t recommend putting them in the dishwasher. To help their longevity, you should clean after use with non-abrasive scourers and soapy water.

Do I need to use a cover on my grill?keyboard_arrow_down

Even though the FURNACE and FORCE are made from die-cast aluminum (which does not rust) we always recommend using an Everdure by Heston Premium Cover to help protect the paint from sun bleaching or UV damage. The products should never be stored without a cover in a damp location for a long period of time.

I've seen images of a rotisserie for the Furnace and Force, are these available?keyboard_arrow_down

They most certainly are available. You can find them here

How do I clean my teppanyaki plate?keyboard_arrow_down

Scrape off the excess food and grease from the surface of the grill with a grill scraper. Do this after every cook to prevent excess build up burning on the grill. If the grill is soiled with burned food debris, then you would have to use a scouring brush in order to rub the debris off. Always rub along the grain of the grill so you don’t damage it. It is highly recommended that you re-season the grill’s surface again after cleaning. Simply apply a thin layer of cooking oil all over the surface to prevent it from rusting.

Preheating the Force/Furnacekeyboard_arrow_down

When preheating, we recommend that as a minimum, it is heated to 570-660°F with all burners on high. As heat will begin to disperse when the hood is open, we recommend intermittently closing the hood. It is to be noted the temperature gauge is not the grill temperature, it is the air temperature under the hood. There is a process to follow where the meat is to be at room temperature before cooking and the grill should be timed for 10min, starting once the pre-heated temperature reaches 570-660°F on the dial. Once the meat has been placed on the grill, the hood should be closed, then after 2 minutes lifted, the meat flipped and hood closed again, repeating until meat is at the desired level, rare, medium-rare, medium or well done, then left to rest before consuming. For open hood cooking, it is recommended to cook the meat on the grill plate and not the flat plate.

How do I cook a pizza on the Force or Furnace?keyboard_arrow_down

To cook pizzas in the FORCE/FURNACE place a Roasting Rack into the center of the barbecue. Position a pizza stone onto the rack and turn the burners onto high. Let the temperature rise. Gently slide the pizza onto the hot stone. Immediately shut the hood and bake for 2 minutes. Open the hood and check if the pizza is fully cooked and the bottom has browned and is crisp. Cook a little longer if needed. Remove using a Pizza Peel and place onto a cutting board or directly onto a plate. Purchase our Pizza Peel and Pizza Cutter to get the best results!

Do you use three grill plates when using the roasting rack? Or a combination of flat and grill plates?keyboard_arrow_down

Roasting is best done using a raised roasting rack, which allows heated air to circulate around the meat, and fats to drip away from the meat. Remove the outside plates and leave the center grill plate in place. Pre-heat the barbeque for 5 minutes with the hood down and the outer gas controls on high (for 3 burner barbeques, leave the center control knob off). Once the grill has reached 355°F, open the hood, place the food on the roasting rack, close the hood and turn the control knobs down to low (these can be adjusted during roasting to keep the internal temperature stable, as weather conditions such as temperature and wind speed will affect the efficiency of the barbecue). Ensure you monitor the food.

Can I use metal tools on my grill?keyboard_arrow_down

The manual does recommend not to use metal tools as there is risk that incorrect use could scratch the surface of the cast iron plates. It doesn’t prevent you from using metal tools, you just need to be careful. As an example, don’t try and cut the meat with the edge of the tools or scrape the tools on the plates

The inside of my Furnace/Force corroded and formed a white dusty surface. What is it?keyboard_arrow_down

This can occur when moisture gets inside the hood. This could include sweating or if the unit is left in the weather with the hood up. The hood is made of alloy so you can clean it off with an alloy cleaner.

Seasoning Grillskeyboard_arrow_down

Remove the grills and clean with warm soapy water, rinse and wipe dry. Put them back into position, turn all burners on high and close the hood. Allow to heat up for 5 minutes, then open the hood. Pour 50ml of vegetable oil onto the flat plate, using a cotton cloth, spread the oil over the plate. Now carefully use the oiled cloth to wipe both the grill plates. Keep the burners on high and do this process two more times, allowing them to burn away the oil. Close the hood and bring the temperature to 480°F. Turn off the gas at the taps, open the hood and wipe with a little more oil once again. Allow to cool, if you’re not cooking and place the cover on.

Setting up the grills and plates on the Furnacekeyboard_arrow_down

With the grill and flat plate set up, positioning them either on the left and right side of the Furnace is really up to you. They are designed to sit and function perfectly on either side. If you purchase a center flat plate, always have the finger access holes to the top. That way no excess fats and oils will leak out through the two holes.

Why do the burners have a really small flame?keyboard_arrow_down

The flames won’t always be the same size, but that won’t effect the efficiency of the design.

Troubleshooting keyboard_arrow_down

What do we do if something is broken?keyboard_arrow_down

Contact Everdure by Heston Blumenthal for service support.

The decals have started to rub off my side servers. What should I do?keyboard_arrow_down

When cleaning the side servers, follow the instructions in the manual to prevent the decals from wiping off. Allow the grill to cool down and then use warm soapy water and a soft cloth. Avoid scrubbing at the decals.